The working principle of the horizontal centrifuge and its improved benefits

1. What is the working principle of the horizontal centrifuge? A: This kind of centrifuge uses the principle of centrifugal sedimentation to separate the suspension, and the liquid phase overflows through the overflow hole at the big end of the drum, and is continuousl...

Centrifuge Operation and Troubleshooting

(1) Inspection and test before operation After the centrifuge is installed, the pre-operation inspection, the idling test and the load test should be carried out in sequence, and the production operation can be carried out only after the corresponding requirements are ...

Centrifuge installation and debugging precautions

1. Pay attention to the following matters when installing the centrifuge: 1.1 The centrifuge must be hoisted through the four hoisting frames on the base, and hooked with a strong enough wire rope, and the centrifuge can be lifted only when the centrifuge is in a horiz...

Centrifuge Failure Analysis and Rotational Rotation Calculation Method

Question 1: What is the reason for the intermittent vibration of the centrifuge? The reasons for the intermittent vibration of the centrifuge are as follows: (1) Check the transmission part of the centrifuge, mainly the tolerance of the bearing, the bearing end of the...